General Hardness

From The Aquarium Wiki
Jump to: navigation, search

°GH - General Hardness

General, total or permanent hardness is a measure of the overall concentration of calcium, magnesium and other ions. It's measured in degrees, with one degree equal to about 17.9mg/l (17.86mg/l). The degree symbol is often replaced with a "d" (i.e. 6dGH or just 6dH). The harder the water, the higher the GH number.


  • Some countries measure GH in ppm (like the USA), others use the German unit dH.
  • Some countries use 'GCH' (General Carbonate Hardness) instead of 'GH'.
  • Some retailers (ADA) use TH abreviation (Total Hardness)
Levels of Hardness
Degrees Parts Per Million Description
0 - 4 dH 0 - 70 ppm wet
4 - 8 dH 70 - 140 ppm soft
8 - 12 dH 140 - 210 ppm medium
12 - 18 dH 210 - 320 ppm firm
18 - 30 dH 320 - 530 ppm hard
Higher > 530ppm solid


Raising GH

If you live in an area with low GH water you may need to add chemicals to increase the GH level to a level suitable for your aquatic animals.

  • Calcium carbonate (CaCO3) is a typical and cheap material to do this. You can find it as Coral sand, coral pieces, sea shells, Cuttle-bone pieces, etc. It is also sold in gardening shops as 'Lime' usually in a powder form. It will however raise KH as well as GH. Which is probably a good thing if you live in a soft water area.
  • Magnesium sulphate (MgSO4) or more commoningly known as Epsom salt. This will raise GH without altering KH. Used in a ratio of 1:3 with CaSO4 (Calcium sulphate) (1 part MgSO4 to 3 parts CaSO4) to make your own GH mix for a freshwater aquarium.

Links