Difference between revisions of "API Nitrite Test Kit"
From The Aquarium Wiki
(Started API Nitrite Test Kit) |
(Nitrite test kit) |
||
Line 1: | Line 1: | ||
− | The '''API Nitrite Test Kit''' test water for the amount of nitrites | + | The '''API Nitrite Test Kit''' test water for the amount of nitrites in a sample of fill water or water from your aquarium. |
+ | |||
+ | == Description == | ||
+ | The API Nitrite Test Kit is a test kit manufactured by [[API|API Fishcare]], a subsidiary of Mars, Inc. It is used to test the level of [[Nitrites|nitrites]] (NO<sub>2</sub><sup>-</sup>) in your water in the range of 0 to 5 [[ppm]]. The kit contents are also available in the API Freshwater Master Test Kit. | ||
+ | |||
+ | == Contents == | ||
+ | The API Nitrite Test Kit comes with a 5 ml test tube, a bottle of test solution, a color comparison chart, and instructions for the user. | ||
+ | |||
+ | == Testing == | ||
+ | *Rinse the test tube a couple of times in the water to be tested to clear out any impurities and old water. | ||
+ | *Fill the tube to the white line (5 ml) with sample water. | ||
+ | *Holding the Nitrite test solution bottle upside down, add 5 drops of test solution, one drop at a time, into the sample water. | ||
+ | *Place the cap on the tube and shake it several times. I shake for 30 seconds or so by turning the tube over and over. | ||
+ | *Let the sample stand for 5 minutes to allow thorough chemical reaction to take place. | ||
+ | *Hold the tube next to the color chart sothe white area of the chart is behind the tube and it is adjacent to the colors on the chart. | ||
+ | *The color closest to the test water indicates the level of nitrites in the water. Acceptable level is at or near zero. See the article about [[Nitrite]]. | ||
+ | *When the test is complete, discard the sample water and rinse the test tube several times. I usually keep about 5 ml fresh water in it with the cap on during storage to prevent mineral buildup on the inside of the tube. | ||
+ | |||
+ | == See also == | ||
+ | *[[Nitrite|Nitrite here at the Aquarium Wiki]] | ||
+ | *[[w:Nitrite|Nitrite at Wikipedia]] | ||
+ | |||
+ | == External links == | ||
+ | [https://apifishcare.com/product/nitrite-test-kit API Nitrite test kit] |
Revision as of 13:03, 4 February 2021
The API Nitrite Test Kit test water for the amount of nitrites in a sample of fill water or water from your aquarium.
Description
The API Nitrite Test Kit is a test kit manufactured by API Fishcare, a subsidiary of Mars, Inc. It is used to test the level of nitrites (NO2-) in your water in the range of 0 to 5 ppm. The kit contents are also available in the API Freshwater Master Test Kit.
Contents
The API Nitrite Test Kit comes with a 5 ml test tube, a bottle of test solution, a color comparison chart, and instructions for the user.
Testing
- Rinse the test tube a couple of times in the water to be tested to clear out any impurities and old water.
- Fill the tube to the white line (5 ml) with sample water.
- Holding the Nitrite test solution bottle upside down, add 5 drops of test solution, one drop at a time, into the sample water.
- Place the cap on the tube and shake it several times. I shake for 30 seconds or so by turning the tube over and over.
- Let the sample stand for 5 minutes to allow thorough chemical reaction to take place.
- Hold the tube next to the color chart sothe white area of the chart is behind the tube and it is adjacent to the colors on the chart.
- The color closest to the test water indicates the level of nitrites in the water. Acceptable level is at or near zero. See the article about Nitrite.
- When the test is complete, discard the sample water and rinse the test tube several times. I usually keep about 5 ml fresh water in it with the cap on during storage to prevent mineral buildup on the inside of the tube.